After a hiatus, work started on the table slab again

Due to some back problems (probably blame that on the 12 80lb bags of concrete that I loaded on to and off the truck) I had to stop work on the oven. However, after some great care from local healthcare specialists, I carefully started on the table again. Building the pouring mould was the first step. I used some leftover plywood, supported on legs made from 2x4 stud lumber to make the bottom of the table slab. I then added a box around the edge of the table, made from 2x8 lumber. I added offcuts of wood to close every other opening in the concrete blocks (saves on concrete), except for the central, thinner leg. Finally I added rebar to the legs that will be filled with concrete, linked to a web of rebar across the table. I also added some PVC pipe for a drain in the back right hand corner, this will be part of a small trough where a basil plant will stand. Nothing like fresh basil on a pizza.